Encone CareYour Health, Our Priority
Manual crank-operated ICU bed with tilt functions and collapsible side rails
Main view

Manual ICU Bed

Crank-operated ICU bed with five positions including Trendelenburg tilt and a mechanical CPR release — full ICU capability without dependence on power.

  • sanitised
  • technician installed

On rent

Not on the rental fleet

This item is supplied for purchase. If you need something similar on rent, call us — we will tell you what the rental fleet can do instead.

To buy

Available

Outright purchase including delivery, installation and a one-year warranty on manufacturing defects.

Get the best quote for this equipment

We price against what you actually need — how long, which configuration, whether nursing goes with it — rather than publishing a number that fits nobody. Ask and we will give you a straight one, GST stated separately.

Quotes state GST separately at the applicable rate. Rental and purchase are taxed differently.

Get the best quote

Tell us how long you need it and what the patient is dealing with. You get a straight quote — and if a cheaper item does the same job, we will say so.

or send your details
Rent or buy?

We use your number to answer this enquiry and nothing else. See our privacy policy.

About this equipment

A manual ICU bed reaches the same positions as its motorised counterpart — including both tilts — using crank handles rather than motors. That makes it cheaper and, more usefully, entirely independent of the power supply, which matters in facilities where outages are routine. The trade-off is effort: reaching a tilt position by crank takes real work, so it suits settings where positions are set and held rather than adjusted through the day.

Indications — when this is used

  • Critical care in facilities with unreliable power
  • High-dependency care where positions are set rather than frequently changed
  • Budget-constrained facility expansion

Who it is for

  • Nursing homes and small hospitals
  • Facilities in areas with frequent power interruption

Brands available

Which brand you receive depends on current stock. Tell us if you need a specific one and we will confirm before dispatch.

  • Hospiline
  • Narang Medical
  • Assorted OEM

Specifications

Functions5 manual — backrest, knee-rest, height, Trendelenburg, reverse
OperationCrank handles, foot end
CPR releaseMechanical, single-pull
Tilt range±12°
PlatformFour-section, radiolucent options available
Side railsCollapsible, full length

Dimensions & space required

Length2150 mm
Width980 mm
Height500–780 mm
WeightApproximately 120 kg
Load capacity230 kg including mattress

Also know about

The things that are easy to find out too late.

  • Sale only

    Rental stock carries the motorised ICU bed instead. Ask us if the need is temporary.

  • Cranking to tilt is hard work

    Reaching a tilt position by hand takes considerable effort. If positions change often through the day, the motorised bed is the realistic choice.

  • Independent of power

    This is its genuine advantage. In a facility with frequent outages, a bed that works regardless is worth more than one that adjusts faster.

  • Still needs a pressure mattress

    As with any bed frame, pressure ulcer prevention comes from the mattress and the turning schedule, not the bed.

Safety & clinical information

Device information, not medical advice. Suitability for a particular patient is a decision for the treating clinician.

How it is installed and used

Delivered in sections and assembled in the room where it will be used. The technician levels the frame, fits the mattress and side rails, connects the controls, and demonstrates every position until the carer has operated each one unaided. Castors are locked once the bed is placed, leaving carer access on both sides.

Before delivery

Confirm the patient's weight is within the frame's safe working load, that the doorway clears 800 mm, and that the room allows roughly 2.6 m × 1.8 m with access on both sides. Patients immobile for more than 16 hours a day should have an alternating-pressure mattress arranged at the same time.

Ongoing care and servicing

Repositioning every two hours remains a nursing requirement — the bed assists it, it does not replace it. Side rails must be raised whenever the patient is unattended. Rental units are stripped, detergent-washed, disinfected and inspected against the manufacturer's reprocessing instructions between patients.

When not to use it

Body weight above the rated safe working load
Every frame states a maximum load including the mattress. Above it, a bariatric bed is required — the frame is not simply 'a bit overloaded'.
Patients at risk of entrapment between rails
Side rails carry a recognised entrapment risk for agitated or very slight patients. The rail gap must be assessed by the treating clinician before rails are used continuously.

Possible side effects

Pressure ulcers
A standard foam mattress does not prevent pressure sores in a continuously bedbound patient. Add an alternating-pressure mattress and keep to a turning schedule.
Limb or digit pinch injury
Fingers and IV lines can be caught in the backrest and knee-rest mechanism while it is moving. Check clearance before operating the control.

Serious risks

Life-threatening, permanently damaging, or requiring hospitalisation.

Fall from bed
Falls from a raised bed with the rails lowered can cause fracture or head injury and frequently require hospitalisation.
Patient entrapment in side rails
Entrapment of the head, neck or chest between rail bars, or between rail and mattress, can cause asphyxiation.

Regulatory status

Classified Class A (low risk) under India's Medical Devices Rules, 2017. CDSCO classifies devices and licenses manufacturers and importers; it does not license rental or resale providers, and Encone Care makes no claim of CDSCO approval.

Relevant specialties

  • Nursing
  • Emergency medicine
  • Geriatric medicine

Frequently asked questions

Why choose a manual ICU bed over an electric one?
Lower cost and complete independence from the power supply. The trade-off is effort — reaching a tilt position by crank is genuinely hard work, so it suits settings where positions are set and held rather than adjusted constantly.

Where we supply this

  • DelhiFor saleInstalled in under 4 hrs
  • New DelhiFor saleInstalled in under 4 hrs

Outside Delhi? We are expanding across the NCR and Uttar Pradesh — call us and we will tell you honestly whether we can reach you.

These might be of interest

Items usually needed alongside this one — chosen because they solve an adjacent problem, not because they cost more.

Call +91 88876 99109WhatsApp